Home
Viewed products
IGLU BLAST CHILLER SHOCK FREEZER 5 TRAY
AG.5TAV
| INFO | DIMENSIONS (mm) | ||
| Description. | Blast Chiller Shock Freezer | Width. | 1230 |
| Chill / Freezer Capacity. | 18kg / 13kg | Depth. | 690 |
| Tray Capacity. | 5 x 70mm pitch | Height. | 860 |
| HACCP Data. | Via USB Port | ||
| System Type. | Integral / Self-contained | WARRANTY | |
| Rated Ambient Class. | +43ºC | Extended Term. | 5/2yrs Parts & Labour |
Downloads
Data sheet
| MODEL | AG.05TAV |
| ITEM DESCRIPTION | Blast Chiller Shock Freezer 5 Tray |
| EXTENDED WARRANTY | 5/2yrs Parts & Labour |
| CERTIFICATIONS / MARKS OF CONFORMITY | HACCP (Compliance), 2006/42/CE, NF, EN 60335-1, EN 60335-2-89, EN 55014-1, EN55014-2, EN 61000-3-2, EN 61000-3-3, 2004/108/CE, RoHS, RAEE, WEEE, REACH |
| CHILL CAPACITY | 18kg (+90ºC to +3ºC less than 90min) |
| FREEZE CAPACITY | 13kg (+90ºC to -18ºC less than 240min) |
| MINIMUM TEMPERATURE | -35°C |
| RATED AMBIENT CLASS | +43°C |
| EXTERNAL DIMENSIONS (mm) | 1230W x 690D x 860H |
| INTERNAL DIMENSIONS (mm) | 700W x 355D x 490H |
| NUMBER OF SHELF POSITIONS & SHELF PITCH PITCH | 5 x 70mm pitch |
| TRAY CAPACITY | (5) x 1/1GN or 600W x 400D |
| PROBE TYPE | Multi-point core probe |
| HACCP DATA INFO | Included - Via USB port |
| INSULATION DENSITY | 45kg/m3 |
| INSULATION DETAIL | 70mm extreme-high-performance 100% CFC & HCFC-free high density rigid foamed polyurethane insulation noted for its unsurpassed stability and highly efficient thermal properties |
| CONTROLLER | Self-adapting multi-function controller, synoptic display, programmable platform, time/temperature controlled chilling & freeze cycles into auto-preservation mode, infinite chill and deep freeze modes |
| REFRIGERATION SYSTEM TYPE | Integral / Self-contained one-piece retracting cassette type, electronically controlled, bottom-mount air-cooled refrigeration unit |
| CONSTRUCTION | Constructed entirely in AISI 304 Cr Ni 18/10 high-grade food safe stainless steel externally with mirror polished interior, coved floor base with radius corners |
| NUMBER & TYPE OF DOOR/S | (1) Self-closing insulated stainless steel panel door with radius handle and 180˚ opening with ‘stop’ (remains open unassisted) at 95˚ |
| COOLING SYSTEM | High-capacity ventilated forced-air |
| DRAINAGE | Not required - auto-condensate disposal device (self-evaporating defrost water removal) |
| WORKTOP | Optional |
| POWER SUPPLY | 240V / 50Hz / 1Ph |
| POWER RATING (Min / Max) | 3,2Amp / 768Watts |
| CONNECTED LOAD | 0,76kW |
| REFRIGERANT GAS QUANTITY - R404a | 900grams |
| COMPRESSOR POWER - R404a | 1hp |
| COOLING CAPACITY - R404a @ +43°C | 528Watts |
| COOLING CAPACITY - R404a @ +32°C | 635Watts |
| ORIGIN | Italy |
| NET / SHIPPED WEIGHT | 115kg / 135kg |
Full Brief
STANDARD FEATURES & INCLUSIONS – Foodservice 1GN / 600x400 / Blast Chiller & Shock Freezer
Extended Warranty Term – 5 year Parts on construction against manufacturing defects or faults and 2 years Labour.
Multi-function Electronic Controller – self-adapting controller with fully programmable platform. Large synoptic display for clear text monitoring of temperatures, cycles and functions at all times. Chill and Freezer cycles include; time based cycles, HACCP defined time or temperature controlled blast chilling and freeze cycles with auto-preservation mode on cycle completion, continuous blast chilling, time or temperature controller ‘Hard’ or ‘Soft’ chilling and freezing with auto- preservation mode, continuous infinite chill and deep freeze mode.
HACCP Acoustic & Visual Alarm – acoustic and visual HACCP alarm activated when temperatures exceed HACCP defined critical temperature and time limits. All events are recorded and stored within the controller software downloadable via USB interface.
Certifications & Marks of Conformity - HACCP Certified, 2006/42/CE, NF, EN 60335-1, EN 60335-2-89, EN 55014-1, EN55014-2, EN 61000-3-2, EN 61000-3-3, 2004/108/CE, RoHS, RAEE, WEEE, REACH.
Extreme-High-Performance – 70mm high-density (45kg/m3) rigid foam polyurethane insulation, Zero Ozone Depleting – (100% CFC-HCFC Free).
+43ºC Ambient (T Class) – all cooling, mechanical components, and all structural elements engineered to perform reliably in a tropicalized climate of +43ºC ambient.
AISI304 Construction – entirely constructed of high-grade-food-safe stainless steel externally and internally featuring a mirror polished interior and coved ceiling and floor base with radius corners (R=12) both top and bottom, insulated floor base, heavy-duty ramp included.
High-efficiency Refrigeration Systems – front-underside mounted high-performance electronic controlled integral refrigeration system, entirely front ventilating refrigeration unit and electrics, condenser & evaporator/s with high-exchange surface area for maximum output of refrigeration cycles.
Quick Chill – product temperature of +90°C lowered to +3°C in less than <90°C measured at the core of the product. Inbuilt software continually monitors critical temperature and time limits at the core of the food throughout the entire cycle. When +3°C core temperature is achieved the blast chiller will automatically cycle into an ‘infinite’ preservation mode with a set temperature of +2°C until such time as it is removed.
Quick Freeze – product temperature of +90°C lowered to -18°C in less than <240°C, measured at the core of the product. Inbuilt software continually monitors critical temperature and time limits at the core of the food throughout the entire cycle. When a -18°C core temperature is achieved the blast chiller will automatically switch into an infinite preservation mode with a set temperature of -20°C until such time as it is removed.
Front Breathing & Plinth Mount Ready – no plinth mount kit required, entirely front ventilating system to allow for installation hard-up against the rear, and technical compartment side walls.
Automatic Fan Cut-off & Door Open Alarm – door to be fitted with a micro switch turns off cooling fans when a door is opened to reduce ambient air in-flow and ensure circulated cold air remains within the cabinet.
Solid Panel Door – AISI304 insulated solid stainless steel panel door with radius door handle, self-closing with 180° opening and ‘stop’ (remains open unassisted) at 95° fitted with integrated micro-switch to facilitate cooling fan ‘Cut-off’ and ‘Door Open’ alarm.
Door Gaskets – to be fitted with replaceable magnetic balloon type door seals for a highly effective door closure and seal, and guarantee increased thermal efficiency.
Door Frame Heater – to eliminate condensation on and around the door fascia.
Waste Vaporizer – auto disposal device fitted to eliminate the defrosting water (drainage not required).
Over-current / Thermal Fuse Protection – inbuilt thermal protection in the event of power surge or thermal compromise to prevent or limit damage to equipment’s electrical components caused by overloads or electrical safety breaches in unusual circumstances.
Refrigerant – R404a refrigerant ready.
AVAILABLE OPTIONS – 5 Tray Blast Chiller & Shock Freezer
Remote Version – air-cooled options available.
Water-cooled Version – water-cooled option available.
Multi-function Electronic Controller – self-adapting controller with fully programmable platform. Large synoptic display for clear text monitoring of temperatures, cycles and functions at all times. Chill and Freezer cycles include; time based cycles, HACCP defined time or temperature controlled blast chilling and freeze cycles with auto-preservation mode on cycle completion, continuous blast chilling, time or temperature controller ‘Hard’ or ‘Soft’ chilling and freezing with auto- preservation mode, continuous infinite chill and deep freeze mode.
HACCP Acoustic & Visual Alarm – acoustic and visual HACCP alarm activated when temperatures exceed HACCP defined critical temperature and time limits. All events are recorded and stored within the controller software downloadable via USB interface.
Certifications & Marks of Conformity - HACCP Certified, 2006/42/CE, NF, EN 60335-1, EN 60335-2-89, EN 55014-1, EN55014-2, EN 61000-3-2, EN 61000-3-3, 2004/108/CE, RoHS, RAEE, WEEE, REACH.
Extreme-High-Performance – 70mm high-density (45kg/m3) rigid foam polyurethane insulation, Zero Ozone Depleting – (100% CFC-HCFC Free).
+43ºC Ambient (T Class) – all cooling, mechanical components, and all structural elements engineered to perform reliably in a tropicalized climate of +43ºC ambient.
AISI304 Construction – entirely constructed of high-grade-food-safe stainless steel externally and internally featuring a mirror polished interior and coved ceiling and floor base with radius corners (R=12) both top and bottom, insulated floor base, heavy-duty ramp included.
High-efficiency Refrigeration Systems – front-underside mounted high-performance electronic controlled integral refrigeration system, entirely front ventilating refrigeration unit and electrics, condenser & evaporator/s with high-exchange surface area for maximum output of refrigeration cycles.
Quick Chill – product temperature of +90°C lowered to +3°C in less than <90°C measured at the core of the product. Inbuilt software continually monitors critical temperature and time limits at the core of the food throughout the entire cycle. When +3°C core temperature is achieved the blast chiller will automatically cycle into an ‘infinite’ preservation mode with a set temperature of +2°C until such time as it is removed.
Quick Freeze – product temperature of +90°C lowered to -18°C in less than <240°C, measured at the core of the product. Inbuilt software continually monitors critical temperature and time limits at the core of the food throughout the entire cycle. When a -18°C core temperature is achieved the blast chiller will automatically switch into an infinite preservation mode with a set temperature of -20°C until such time as it is removed.
Front Breathing & Plinth Mount Ready – no plinth mount kit required, entirely front ventilating system to allow for installation hard-up against the rear, and technical compartment side walls.
Automatic Fan Cut-off & Door Open Alarm – door to be fitted with a micro switch turns off cooling fans when a door is opened to reduce ambient air in-flow and ensure circulated cold air remains within the cabinet.
Solid Panel Door – AISI304 insulated solid stainless steel panel door with radius door handle, self-closing with 180° opening and ‘stop’ (remains open unassisted) at 95° fitted with integrated micro-switch to facilitate cooling fan ‘Cut-off’ and ‘Door Open’ alarm.
Door Gaskets – to be fitted with replaceable magnetic balloon type door seals for a highly effective door closure and seal, and guarantee increased thermal efficiency.
Door Frame Heater – to eliminate condensation on and around the door fascia.
Waste Vaporizer – auto disposal device fitted to eliminate the defrosting water (drainage not required).
Over-current / Thermal Fuse Protection – inbuilt thermal protection in the event of power surge or thermal compromise to prevent or limit damage to equipment’s electrical components caused by overloads or electrical safety breaches in unusual circumstances.
Refrigerant – R404a refrigerant ready.
AVAILABLE OPTIONS – 5 Tray Blast Chiller & Shock Freezer
Remote Version – air-cooled options available.
Water-cooled Version – water-cooled option available.
